DynaVap Vaporisers & Accessories

DynaVap makes battery-free vaporisers, and they work unlike anything else on the market. There are no electronics, no charging and no screen. You load the tip, heat the cap with a torch or induction heater, and the cap clicks when it reaches temperature. Click again on the way down and the session is over. DynaVap calls them Thermal Extraction Devices, and they are sold under the manufacturer's own branding as the DynaVap Vaporizer.

The range runs from the entry-level G3 through the flagship M7 and longer M7 XL, to the timber-bodied WoodWynd and the big-bowl titanium HyperDyn. Because the devices are modular, tips, caps, condensers and mouthpieces swap between them, so most owners end up building a setup rather than buying one.

We stock the DynaVap parts and accessories in Australia that actually wear out: condensers, O-ring kits, titanium CCD screens, tips and DynaWax. Everything ships same day from our Australian warehouse, and if you are not sure which part fits which device, call us on 1300 420 965 and we will work it out with you.

Showing 1 - 19 of 19 results

DynaVap Vaporisers & Accessories FAQs

How does a DynaVap work?
There are no batteries and no electronics. You remove the cap, load ground material into the tip, put the cap back on, and heat the cap with a butane torch or an induction heater. After roughly five to seven seconds the cap clicks, which means it has reached temperature. You then inhale from the mouthpiece. A second click as it cools tells you the session is finished.
What is the click?
The cap contains a bimetallic disc that snaps when it reaches vaporisation temperature, and snaps back as it cools. It is the whole design philosophy in one detail: instead of a screen and a temperature dial, the device tells you audibly when it is ready. It also means you never have to guess, and two people using the same device get the same result.
Do I need a torch, or will a normal lighter work?
A normal lighter will work but it is slow and it sooties the cap. A butane torch is the standard choice and heats in a few seconds. An induction heater is the tidiest option: you drop the device into the chamber, there is no flame and no rotating, and you get the same result every session. Most owners start with a torch and move to an induction heater once they are using the device daily. We stock the YLL induction heater for exactly that step.
Will the YLL induction heater work with my DynaVap?
The YLL heats every DynaVap in our range except the HyperDyn, whose cap does not fit the heating chamber. If you run a HyperDyn, stay with a butane torch. For the M7, M7 XL, WoodWynd and G3, the YLL is a straight swap for the torch: set the wattage, drop the device in, and take it out at the click. If you are unsure, call us before ordering rather than after.
Which DynaVap should I start with?
The G3 is the cheapest way in and uses the same click mechanism as everything else. The M7 is the flagship and the one most people settle on. The M7 XL adds length, which cools the vapour further and gives adjustable airflow. The WoodWynd swaps the metal body for timber. The HyperDyn has the largest chamber in the range and suits longer sessions. Because parts are interchangeable, starting small is a low-risk way in.
Are DynaVap parts interchangeable between models?
Mostly yes. Tips, midsections, condensers and mouthpieces swap freely across the M series and most of the range, which is why so many owners mix and match. The main exception is the Hyper Cap, which only fits the Hyper Tip. If you are unsure whether a part suits your device, call us before ordering.
How do I clean a DynaVap?
Because there are no electronics, the whole device can be cleaned with isopropyl alcohol. Disassemble it, soak the metal parts, brush out the tip, rinse and dry thoroughly before reassembling. DynaWax on the O-rings after cleaning keeps the parts sliding smoothly and maintains the seal. O-rings are consumable, so replace them when they lose their grip.
Do DynaVap devices come with a warranty?
DynaVap devices are built to last and the manufacturer handles warranty issues case by case. You will need the UPC code from the packaging, so keep the box. Keep your order confirmation as proof of purchase and contact us if you need help making a claim.
How fast do you ship?
Orders placed before 2pm AEST on business days are dispatched the same day, with free express shipping over $80. Most of Australia receives orders the next business day, with more remote areas around two days.

Explore More Products

New to DynaVap and still comparing? Our full dry herb vaporiser range covers portable and desktop devices side by side. The Tempest 2 is the other battery-free option we stock, a portable ball vape that takes a different approach to the same idea. If you want an ARTG-included medical device instead, see the Mighty+ Medic. For grinders, cases and cleaning supplies, browse accessories